Protimeter Aquant

The Protimeter Aquant is a non-invasive moisture meter used to assess and monitor the relative moisture level of building materials, fiberglass (GRP) including boats, caravans and motorhomes.

Features and Benefits
• Non-invasive measuring - no pin marks left
• Detects moisture directly in materials
• Detects moisture below wall / floor coverings (tile, wood and vinyl)
• Dual Display LCD and LED
• Colour changing LED's to show moisture condition
• Reset reading for sensitivity adjustment
• Not adversely affected by surface moisture such as condensation

The Protimeter Aquant is the ideal instrument for checking the relative moisture condition of building elements such as solid walls and floors prior to more rigorous and time-consuming investigative procedures that may be required.

Measure Below A Surface
The Protimeter Aquant can be used to detect the presence of moisture behind floor and wall coverings such as ceramic tile and vinyl floor coverings. The same technology allows the Protimeter Aquant to survey for the early detection of damp spots within GRP boat hulls that could lead to blistering caused by osmosis.

Search Mode (non-invasive)
The Protimeter Aquant is very simple to use by holding the instrument against the surface of the material under investigation. The relative moisture level is measured by radio frequency to a nominal depth of 10-20mm. There are no needles to mark the surface and the Protimeter Aquant is not adversely affected by moisture.

Digital Readings
The Protimeter Aquant features two displays that are synchronized, a digital LCD display supported by a colour-coded LED scale.

The display shows the relative moisture level of the material under investigation on a scale of 0-999. The colour coded LED scale indicates the material’s moisture condition, helping to support the readings. This provides a very simple way to determine if the readings are Dry, Borderline and Damp.