Uzin NC172 Bi Turbo Smoothing Compound

Uzin NC172 Bi Turbo Smoothing Compound

 Extremely rapid drying, cement smoothing compound with the Level Plus Effect for virtually all areas of use, all substrate types and at any thickness

• Extremely rapid drying and no primer required in most cases, fast and cost-saving
• Very smooth surface finish, therefore lower adhesive consumption and no grinding needed in most cases

 Applications:

• For fast installation of e.g. all types of textile coverings. 
• Very rapid drying, ready for floor coverings in 60 minutes
• PVC/cushioned vinyl, PVC design flooring, linoleum, rubber sheet and tile coverings as well as ceramic tiling and natural stone
• For installation of wood flooring, polyolefin and polyurethane floor coverings after a drying time of 12 hours

 Without primer:

• On existing surfaces in need of renovation, e.g. over old, dense, well-bonded, waterproof synthetic resin, Neoprene, bitumen or dispersion adhesives, on new chipboard V100 or OSB boards – when soundly screw-fixed as well as on new mastic asphalt

 With primer:

• On absorbent substrates, e.g. cement screeds, calcium sulphate screeds or concrete, old terrazzo, ceramic tiling and natural stone, on old mastic asphalt and as a scratch-coat on bituminous concrete and cold pitchmastic

 Properties:

• Hydraulic setting
• No primer required in most cases
• Easy to rub down during initial cure-phase
• Very smooth surface finish
• Easy adhesive application and up to 10 % lower adhesive consumption
• For interior use only

  Approx Coverage 15m2 @ 1mm